基于半实物仿真技术的复杂电系统设备检测平台的硬件设计

仇佳捷; 包涌金; 张峰; 张士文; 王建兵

仇佳捷,包涌金,张峰,张士文,王建兵.基于半实物仿真技术的复杂电系统设备检测平台的硬件设计[J].电测与仪表,2012,49(4):92-96.
QIU Jia-jie , BAO Yong-jin , ZHANG Feng , ZHANG Shi-wen , WANG Jian-bing.Hardware Design of Universal Detecting Platform for Complex Electronic System Based on Hardware-in-the-Loop Simulation Technology[J].Electrical Measurement & Instrumentation,2012,49(4):92-96.

基于半实物仿真技术的复杂电系统设备检测平台的硬件设计

Hardware Design of Universal Detecting Platform for Complex Electronic System Based on Hardware-in-the-Loop Simulation Technology

DOI：

中文关键词: 半实物仿真虚拟仪器检测平台硬件设计

英文关键词:hardware-in-the-loop simulation(HILS) virtual instrument detecting platform hardware design

基金项目:

作者中文名	作者英文名	单位
仇佳捷,包涌金,张峰,张士文,王建兵	QIU Jia-jie , BAO Yong-jin , ZHANG Feng , ZHANG Shi-wen , WANG Jian-bing	1. 上海交通大学电子信息与电气工程学院,上海,200240 2. 上海申通地铁集团有限公司维护保障中心,上海,200070

摘要点击次数: 1655

中文摘要:

就复杂电系统检测平台的硬件设计提出一种通用的解决方案。这种基于半实物仿真技术与虚拟仪器技术的通用检测平台设计方案可以根据待测设备特性进行适当配置,有效降低开发难度,缩短研发周期。以iFE公司的一款地铁门控单元测试平台开发为例,给出了具体的使用思路与配置方法。

英文摘要:

In this paper,a universal solution is put forward for hardware design of detecting platform for complex electronic system,which is based on hardware-in-the loop simulation technology and virtual instrument technology.Proper configuring this solution,according to the characteristic of under-test device,will reduce the difficulty and period of detecting platform development.Taking detecting platform for an exterior of door control unit produced by iFE for example,specific method of use is given,and advantages are proved.

查看全文查看/发表评论下载PDF阅读器

关闭