• 设为首页
  • 加入收藏
  • 联系邮箱
  • 网站首页
  • 期刊介绍
    • 期刊简介
    • 历任主编
    • 期刊荣誉
  • 编委会
    • 社长及主编
    • 主任委员
    • 编委名单
  • 投稿指南
    • 作者须知
    • 投稿步骤
    • 范文(规范细则)
    • 稿件处理流程
    • 著作权转让协议
  • 期刊影响力
  • 开放获取
  • 出版道德政策
    • 出版伦理声明
    • 学术不端认定和处理方法
    • 广告及市场推广
    • 同行评议流程
    • 斟误和撤回
    • 回避制度
    • 文章署名及版权转让
  • 历年目次
  • 联系我们
  • English
站内检索    
 
王建元,鞠默欣,鞠默然,徐志璇,马雪珂.基于HHT小电流接地电力电缆在线故障测距方法[J].电测与仪表,2015,52(13):.
WANG Jian-yuan,JU Mo-xin,JU Mo-ran,XU Zhi-xuan,MA Xue-ke.A Method of Power Cable Fault Location Online in Neutral Point Ineffectively Grounded Power System Based on HHT[J].Electrical Measurement & Instrumentation,2015,52(13):.
基于HHT小电流接地电力电缆在线故障测距方法
A Method of Power Cable Fault Location Online in Neutral Point Ineffectively Grounded Power System Based on HHT
DOI:
中文关键词:  HHT  小电流接地系统  电力电缆  在线故障测距
英文关键词:HHT  Neutral point ineffectively grounded power system  Power cable  Fault location online
基金项目:
              
作者中文名作者英文名单位
王建元WANG Jian-yuan东北电力大学
鞠默欣JU Mo-xin东北电力大学
鞠默然JU Mo-ran吉林大学
徐志璇XU Zhi-xuan东北电力大学
马雪珂MA Xue-ke东北电力大学
摘要点击次数: 1990
中文摘要:
      使用电力电缆进行电力传输已经逐渐被推广,在小电流接地系统发生单相接地故障时,由于系统仍可运行1-2小时,这就要求在不断电的情况下,检测出故障的位置。本文提出一种基于HHT小电流接地系统电力电缆单端在线故障测距的方法,在电缆参数未知的情况下,采用合闸时产生的操作过电压行波在线测量行波波速,单相接地故障发生后,利用HHT寻找行波瞬时频率突变的时刻,并运用单端测距法实现电力电缆故障测距。最后,对算例进行数值仿真,仿真结果验证了该方法的可行性和实用性。
英文摘要:
      Power cable for power transmission has been gradually extended. The system can be still running 1-2 hours when single-phase-to-earth fault occurs, which requires the location of the fault is detected in the case of UPS. A method of power cable fault location online in neutral point ineffectively grounded power system based on HHT is proposed in this paper. Under the condition that the parameters of cable are unknown, the velocity of traveling wave in cable can be measured by the use of switching overvoltage wave which is generated when the closing occurs. When single-phase-to-earth fault happens, HHT is used to find the mutations moments of instantaneous frequency. Then the location of power cable fault is determined by one-terminal fault location method. Finally, the digital simulation results of an example show the effectiveness and practicability of this method.
查看全文  查看/发表评论  下载PDF阅读器
关闭
  • 哈尔滨电工仪表研究所有限公司
  • 中国电工仪器仪表信息网
  • 中国仪器仪表学会
  • 中华人民共和国新闻出版总署
  • 中国科技期刊编辑学会
  • 黑龙江省科学技术协会
  • 编辑之家
  • 中国知网
  • 万方数据库
  • 维普网
  • 北极星电力网
  • 中华中控网
  • 网站首页
  • 期刊介绍
    • 期刊简介
    • 历任主编
    • 期刊荣誉
  • 编委会
    • 社长及主编
    • 主任委员
    • 编委名单
  • 投稿指南
    • 作者须知
    • 投稿步骤
    • 范文(规范细则)
    • 稿件处理流程
    • 著作权转让协议
  • 期刊影响力
  • 开放获取
  • 出版道德政策
    • 出版伦理声明
    • 学术不端认定和处理方法
    • 广告及市场推广
    • 同行评议流程
    • 斟误和撤回
    • 回避制度
    • 文章署名及版权转让
  • 历年目次
  • 联系我们
地址:哈尔滨市松北区创新路2000号    邮编:150028
邮箱:dcyb@vip.163.com    电话:0451-86611021;87186023
© 2012 电测与仪表    哈公网监备2301003445号
黑ICP备11006624号-1
技术支持:北京勤云科技发展有限公司