• 设为首页
  • 加入收藏
  • 联系邮箱
  • 网站首页
  • 期刊介绍
    • 期刊简介
    • 历任主编
    • 期刊荣誉
  • 编委会
    • 社长及主编
    • 主任委员
    • 编委名单
  • 投稿指南
    • 作者须知
    • 投稿步骤
    • 范文(规范细则)
    • 稿件处理流程
    • 著作权转让协议
  • 期刊影响力
  • 开放获取
  • 出版道德政策
    • 出版伦理声明
    • 学术不端认定和处理方法
    • 广告及市场推广
    • 同行评议流程
    • 斟误和撤回
    • 回避制度
    • 文章署名及版权转让
  • 历年目次
  • 联系我们
  • English
站内检索    
 
王玉梅,吴志明.分布式电源接入配电网的最佳位置和容量研究[J].电测与仪表,2016,53(21):.
WANG Yumei,WU Zhiming.Study on the optimal location and capacity of Distributed generation access to Distribution network[J].Electrical Measurement & Instrumentation,2016,53(21):.
分布式电源接入配电网的最佳位置和容量研究
Study on the optimal location and capacity of Distributed generation access to Distribution network
DOI:
中文关键词:  位置和容量  风光联合系统  序贯蒙特卡洛模拟  牛顿法  潮流计算
英文关键词:position  and capacity, photovoltaic  and wind  power system, sequential  Monte-Carlo  simulation, Newton  Method, power  flow calculation.
基金项目:河南省科技攻关项目(112102210004):
     
作者中文名作者英文名单位
王玉梅WANG Yumei河南理工大学 电气工程与自动化学院
吴志明WU Zhiming河南理工大学 电气工程与自动化学院
摘要点击次数: 1935
中文摘要:
      本文提出一种考虑反向潮流次数、电压质量和网损为目标的分布式电源接入配电网最佳位置和容量的方法。该方法利用序贯蒙特卡洛模拟法处理风光联合电源出力的随机特性,根据配电网的运行特点,对配电网中的负荷进行加权处理。以配电网电压改善效果最好、潮流反向次数最少、网损最小作为目标函数,以节点电压、有功功率、无功功率等为约束条件,运用牛顿法进行配电网潮流分布计算,确定最佳位置和容量。结合实际配电网进行了仿真,验证了所提方法的可行性和有效性。
英文摘要:
      The paper proposes a method to choose the optimal position and capacity for the distributed generation connected to the distribution networks based on the times of reverse power flow, voltage quality and network loss. This method employs sequential Monte-Carlo simulation to deal with the randomness characteristics of photovoltaic and wind power output; the loads of the distribution networks are weighted according to the operation characteristics of the power distribution networks. With the most improvements of the voltage, the least times of the reverse power flow and the least network loss as the target functions and the node voltage, the active and reactive power as the constraint conditions, it applies Newton Method to calculate the power flow of the distribution network to get the optimal position and capacity. Combined with the actual distribution networks, the simulation results proved the practicability and effectiveness of the proposed method.
查看全文  查看/发表评论  下载PDF阅读器
关闭
  • 哈尔滨电工仪表研究所有限公司
  • 中国电工仪器仪表信息网
  • 中国仪器仪表学会
  • 中华人民共和国新闻出版总署
  • 中国科技期刊编辑学会
  • 黑龙江省科学技术协会
  • 编辑之家
  • 中国知网
  • 万方数据库
  • 维普网
  • 北极星电力网
  • 中华中控网
  • 网站首页
  • 期刊介绍
    • 期刊简介
    • 历任主编
    • 期刊荣誉
  • 编委会
    • 社长及主编
    • 主任委员
    • 编委名单
  • 投稿指南
    • 作者须知
    • 投稿步骤
    • 范文(规范细则)
    • 稿件处理流程
    • 著作权转让协议
  • 期刊影响力
  • 开放获取
  • 出版道德政策
    • 出版伦理声明
    • 学术不端认定和处理方法
    • 广告及市场推广
    • 同行评议流程
    • 斟误和撤回
    • 回避制度
    • 文章署名及版权转让
  • 历年目次
  • 联系我们
地址:哈尔滨市松北区创新路2000号    邮编:150028
邮箱:dcyb@vip.163.com    电话:0451-86611021;87186023
© 2012 电测与仪表    哈公网监备2301003445号
黑ICP备11006624号-1
技术支持:北京勤云科技发展有限公司