• 设为首页
  • 加入收藏
  • 联系邮箱
  • 网站首页
  • 期刊介绍
    • 期刊简介
    • 历任主编
    • 期刊荣誉
  • 编委会
    • 社长及主编
    • 主任委员
    • 编委名单
  • 投稿指南
    • 作者须知
    • 投稿步骤
    • 范文(规范细则)
    • 稿件处理流程
    • 著作权转让协议
  • 期刊影响力
  • 开放获取
  • 出版道德政策
    • 出版伦理声明
    • 学术不端认定和处理方法
    • 广告及市场推广
    • 同行评议流程
    • 斟误和撤回
    • 回避制度
    • 文章署名及版权转让
  • 历年目次
  • 联系我们
  • English
站内检索    
 
陈炯,徐璐琪,徐广鹦.基于三次谐波法的避雷器阻性电流测量方法研究[J].电测与仪表,2016,53(23):.
Chen Jiong,Xu Luqi,xu guangying.Research on Detection Method of MOA Resistance Leakage Current Based on Third Harmonic Component[J].Electrical Measurement & Instrumentation,2016,53(23):.
基于三次谐波法的避雷器阻性电流测量方法研究
Research on Detection Method of MOA Resistance Leakage Current Based on Third Harmonic Component
DOI:
中文关键词:  氧化锌避雷器  三次谐波法  带通滤波电路  峰值检测电路
英文关键词:MOA, third harmonic component, bandpass circuitry, peak detection circuitry
基金项目:
        
作者中文名作者英文名单位
陈炯Chen Jiong上海电力学院
徐璐琪Xu Luqi上海电力学院
徐广鹦xu guangying上海市电力公司检修公司
摘要点击次数: 1988
中文摘要:
      根据DL/TS987-2005标准所推荐避雷器泄漏电流标准波形,本论文对阻性电流的测量电路进行了设计。整个系统采用电流传感器耦合的方法实现对泄漏电流的输出,然后将信号通过带通滤波器实现对全泄漏电流的三次谐波的提取,接着利用峰值检测电路实现对三次谐波的测量,同时结合三次谐波和基波之间的关系实现对基波分量的测量。整个论文对测量原理、六阶多重负反馈带通滤波电路以及峰值检测电路进行了详细地介绍。为了了解所设计电路的可行性,对整个电路进行了搭建和测量,由测量的结果可以看出,本论文所设计的电路测试数据和输入数据之间的误差接近1%,这满足现场的测量要求。因此,本论文所设计的电路可实现对避雷器阻性泄漏的测量。
英文摘要:
      The paper designs a circuit measuring resistive current, on the basis of leakage current standard waveform of the surge arrester recommended by the criterion of DL/TS987-2005. The way of current sensor interconnection is used by the system to achieve the output of leakage current and the extraction of third harmonic of the total leakage current is realized through the technique of passing signals through bandpass filter. Then the measurement of third harmonic is attained by the peak detection circuit, and the determination of the fundamental component is achieved through the relationship between third harmonic and fundamental wave. The article introduces the measurement principle, six order multiple negative feedback bandpass filter and the peak detection circuit. The whole circuit is constructed and measured to understand the feasibility of the designing circuit. It is the deviation between test data and input data of the designing circuit in this paper derived from the measurement result approaches 1%, which meets with the acquirement of on-siteSmeasure. Consequently, the circuit designed by the paper could achieve the measurement of the arrester resistive leakage.
查看全文  查看/发表评论  下载PDF阅读器
关闭
  • 哈尔滨电工仪表研究所有限公司
  • 中国电工仪器仪表信息网
  • 中国仪器仪表学会
  • 中华人民共和国新闻出版总署
  • 中国科技期刊编辑学会
  • 黑龙江省科学技术协会
  • 编辑之家
  • 中国知网
  • 万方数据库
  • 维普网
  • 北极星电力网
  • 中华中控网
  • 网站首页
  • 期刊介绍
    • 期刊简介
    • 历任主编
    • 期刊荣誉
  • 编委会
    • 社长及主编
    • 主任委员
    • 编委名单
  • 投稿指南
    • 作者须知
    • 投稿步骤
    • 范文(规范细则)
    • 稿件处理流程
    • 著作权转让协议
  • 期刊影响力
  • 开放获取
  • 出版道德政策
    • 出版伦理声明
    • 学术不端认定和处理方法
    • 广告及市场推广
    • 同行评议流程
    • 斟误和撤回
    • 回避制度
    • 文章署名及版权转让
  • 历年目次
  • 联系我们
地址:哈尔滨市松北区创新路2000号    邮编:150028
邮箱:dcyb@vip.163.com    电话:0451-86611021;87186023
© 2012 电测与仪表    哈公网监备2301003445号
黑ICP备11006624号-1
技术支持:北京勤云科技发展有限公司