• 设为首页
  • 加入收藏
  • 联系邮箱
  • 网站首页
  • 期刊介绍
    • 期刊简介
    • 历任主编
    • 期刊荣誉
  • 编委会
    • 社长及主编
    • 主任委员
    • 编委名单
  • 投稿指南
    • 作者须知
    • 投稿步骤
    • 范文(规范细则)
    • 稿件处理流程
    • 著作权转让协议
  • 期刊影响力
  • 开放获取
  • 出版道德政策
    • 出版伦理声明
    • 学术不端认定和处理方法
    • 广告及市场推广
    • 同行评议流程
    • 斟误和撤回
    • 回避制度
    • 文章署名及版权转让
  • 历年目次
  • 联系我们
  • English
站内检索    
 
钟成,苏汉,金志杰,杜帅兵.基于扩展相分量法的OPGW系统接地短路电流计算[J].电测与仪表,2017,54(10):.
Zhong Cheng,Su Han,Jin Zhijie,Du Shuaibing.The Analysis of Grounding Fault Current Distribution in OPGW System Based on the Improved Phase Component Method[J].Electrical Measurement & Instrumentation,2017,54(10):.
基于扩展相分量法的OPGW系统接地短路电流计算
The Analysis of Grounding Fault Current Distribution in OPGW System Based on the Improved Phase Component Method
DOI:
中文关键词:  光纤复合架空地线  杆塔  扩展相分量法  单相接地短路  短路电流分布
英文关键词:optical fiber composite overhead ground wire, power tower, the improved phase component method, single-phase to ground fault, the  distribution of  fault current
基金项目:
           
作者中文名作者英文名单位
钟成Zhong Cheng国网河北省电力公司衡水供电公司
苏汉Su Han国网河北省电力公司衡水供电公司
金志杰Jin Zhijie国网河北省电力公司衡水供电公司
杜帅兵Du Shuaibing国网河北省电力公司衡水供电公司
摘要点击次数: 1374
中文摘要:
      在架空输电系统中,光纤复合架空地线(OPGW)的应用越来越多。在OPGW线分布的短路电流值对OPGW线的设计和选型、架空输电线路的安全运行都有着重要的影响。由于传统相分量模型能够反映出各导线间的相互影响关系,本文在传统的相分量的基础上,对其进行了改进,即考虑两者之间的相互作用,将相导线和OPGW线作为一个整体,同时采用一致的模型进行分析。这种扩展相分量模型能够充分考虑线路不同杆塔型号造成的互感变化、OPGW线是否逐塔接地和OPGW线是否分段绝缘运行的情形,能够准确计算发生单相接地短路时,OPGW线和相线上短路电流等沿线分布的电气量。文中算例计算结果与EMTP仿真结果的对比,验证了本文计算的正确性。本文的方法计算准确,为架空输电线路沿线短路电流的分布提供了量化计算的依据,并且已经在电力工程设计中得到了应用。
英文摘要:
      OPGW is the abbreviation for the optical fiber composite overhead ground wire. The distribution of the current on OPGW has a significant influence on the power system,designing and selecting the OPGWs. We apply the improved phase component method to analyze the quantified calculation of the current flowing on the OPGW lines with the asymmetric short-circuit. Traditional phase component method usually regards the phase wires as analysis system. The improved phase component method is on basis of the traditional phase component method and takes the OPGWs into consideration, resulting in forming the phase wires and OPGWs as a complete system. To prove the correctness of the theory and calculation results,this paper compares the results with those from EMTP simulation software. This theory provides a method to calculate the fault currents along the transmission line. At last, the conclusion is been verified in an actual project example.
查看全文  查看/发表评论  下载PDF阅读器
关闭
  • 哈尔滨电工仪表研究所有限公司
  • 中国电工仪器仪表信息网
  • 中国仪器仪表学会
  • 中华人民共和国新闻出版总署
  • 中国科技期刊编辑学会
  • 黑龙江省科学技术协会
  • 编辑之家
  • 中国知网
  • 万方数据库
  • 维普网
  • 北极星电力网
  • 中华中控网
  • 网站首页
  • 期刊介绍
    • 期刊简介
    • 历任主编
    • 期刊荣誉
  • 编委会
    • 社长及主编
    • 主任委员
    • 编委名单
  • 投稿指南
    • 作者须知
    • 投稿步骤
    • 范文(规范细则)
    • 稿件处理流程
    • 著作权转让协议
  • 期刊影响力
  • 开放获取
  • 出版道德政策
    • 出版伦理声明
    • 学术不端认定和处理方法
    • 广告及市场推广
    • 同行评议流程
    • 斟误和撤回
    • 回避制度
    • 文章署名及版权转让
  • 历年目次
  • 联系我们
地址:哈尔滨市松北区创新路2000号    邮编:150028
邮箱:dcyb@vip.163.com    电话:0451-86611021;87186023
© 2012 电测与仪表    哈公网监备2301003445号
黑ICP备11006624号-1
技术支持:北京勤云科技发展有限公司