• 设为首页
  • 加入收藏
  • 联系邮箱
  • 网站首页
  • 期刊介绍
    • 期刊简介
    • 历任主编
    • 期刊荣誉
  • 编委会
    • 社长及主编
    • 主任委员
    • 编委名单
  • 投稿指南
    • 作者须知
    • 投稿步骤
    • 范文(规范细则)
    • 稿件处理流程
    • 著作权转让协议
  • 期刊影响力
  • 开放获取
  • 出版道德政策
    • 出版伦理声明
    • 学术不端认定和处理方法
    • 广告及市场推广
    • 同行评议流程
    • 斟误和撤回
    • 回避制度
    • 文章署名及版权转让
  • 历年目次
  • 联系我们
  • English
站内检索    
 
刘清蝉,曹敏,李波,林聪,曾麟,李开成.基于Hanning自卷积窗和三谱线插值的 谐波无功功率测量方法[J].电测与仪表,2017,54(20):.
LIU Qing-chan,Cao Min,LI Bo,LIN Cong,Zeng Lin,Li Kaicheng.A method of harmonic reactive power measurement based on Hanning self-convolution window and triple-spectrum-line interpolation[J].Electrical Measurement & Instrumentation,2017,54(20):.
基于Hanning自卷积窗和三谱线插值的 谐波无功功率测量方法
A method of harmonic reactive power measurement based on Hanning self-convolution window and triple-spectrum-line interpolation
DOI:
中文关键词:  Hanning自卷积窗  三谱线插值  无功功率  Matlab
英文关键词:Hanning self-convolution window, triple-spectrum-line interpolation, reactive power, MATLAB
基金项目:国家自然科学基金资助项目(51277080),基于粒子滤波的电能质量统一分析理论研究
                 
作者中文名作者英文名单位
刘清蝉LIU Qing-chan云南电网有限责任公司电力科学研究院
曹敏Cao Min云南电网有限责任公司电力科学研究院
李波LI Bo云南电网有限责任公司电力科学研究院
林聪LIN Cong云南电网有限责任公司电力科学研究院
曾麟Zeng Lin华中科技大学
李开成Li Kaicheng华中科技大学
摘要点击次数: 2176
中文摘要:
      本文提出一种基于Hanning自卷积窗和三谱线插值的谐波无功功率测量方法。根据Budeanu关于无功功率的定义,直接计算无功。而计算所需要的谐波的频率、幅值和相位则通过采用基于Hanning自卷积窗和三谱线插值的算法得到。利用性能优越的Hanning自卷积窗抑制信号的频谱泄漏,同时利用幅值最大的谱线及其相邻2根谱线进行三谱线插值以确定谱线的准确位置,进而得到谐波的频率、幅值和相角。直接计算无功,比采用重构的方法要简单使用。在Matlab平台上的仿真表明,基波频率波动的情况下,本文所提方法得出的结果比基于双谱线插值算得出的结果具有更高的准确度。
英文摘要:
      This paper presents a novel method of harmonic reactive power measurement based on Hanning self-convolution window and triple-spectrum-line interpolation. The reactive power is calculated directly according to the reactive power’s definition of Budeanu. The frequency, amplitude and phase of harmonics demanded by the calculation is obtained from Hanning self-convolution window and triple-spectrum-line interpolation algorithm. The Hanning self-convolution window has superior performance of suppress spectrum leakages. Meanwhile the maximum amplitude of the spectrum and its neighboring two lines are utilized to determine the exact location of spectral lines we need. Thus the harmonic frequency, amplitude and phase could be obtained. Direct calculation of reactive power is simpler and more efficient than the use of reconstruction method. The simulations in MATLAB have verified that the method has a better precision than the double-spectrum-line interpolation method using the same window and the reconstruction method.
查看全文  查看/发表评论  下载PDF阅读器
关闭
  • 哈尔滨电工仪表研究所有限公司
  • 中国电工仪器仪表信息网
  • 中国仪器仪表学会
  • 中华人民共和国新闻出版总署
  • 中国科技期刊编辑学会
  • 黑龙江省科学技术协会
  • 编辑之家
  • 中国知网
  • 万方数据库
  • 维普网
  • 北极星电力网
  • 中华中控网
  • 网站首页
  • 期刊介绍
    • 期刊简介
    • 历任主编
    • 期刊荣誉
  • 编委会
    • 社长及主编
    • 主任委员
    • 编委名单
  • 投稿指南
    • 作者须知
    • 投稿步骤
    • 范文(规范细则)
    • 稿件处理流程
    • 著作权转让协议
  • 期刊影响力
  • 开放获取
  • 出版道德政策
    • 出版伦理声明
    • 学术不端认定和处理方法
    • 广告及市场推广
    • 同行评议流程
    • 斟误和撤回
    • 回避制度
    • 文章署名及版权转让
  • 历年目次
  • 联系我们
地址:哈尔滨市松北区创新路2000号    邮编:150028
邮箱:dcyb@vip.163.com    电话:0451-86611021;87186023
© 2012 电测与仪表    哈公网监备2301003445号
黑ICP备11006624号-1
技术支持:北京勤云科技发展有限公司