• 设为首页
  • 加入收藏
  • 联系邮箱
  • 网站首页
  • 期刊介绍
    • 期刊简介
    • 历任主编
    • 期刊荣誉
  • 编委会
    • 社长及主编
    • 主任委员
    • 编委名单
  • 投稿指南
    • 作者须知
    • 投稿步骤
    • 范文(规范细则)
    • 稿件处理流程
    • 著作权转让协议
  • 期刊影响力
  • 开放获取
  • 出版道德政策
    • 出版伦理声明
    • 学术不端认定和处理方法
    • 广告及市场推广
    • 同行评议流程
    • 斟误和撤回
    • 回避制度
    • 文章署名及版权转让
  • 历年目次
  • 联系我们
  • English
站内检索    
 
王立城,王东山,白晖峰,霍 超.基于AMI测量参数的电力线通信组网技术[J].电测与仪表,2017,54(21):.
WANG Li-cheng,WANG Dongshan,BAI Hui-feng,Huo Chao.Power line communication networking technology based on AMI measurement parameters[J].Electrical Measurement & Instrumentation,2017,54(21):.
基于AMI测量参数的电力线通信组网技术
Power line communication networking technology based on AMI measurement parameters
DOI:
中文关键词:  AMI  电力线载波  CSMA  信号强度  洪泛
英文关键词:AMI,PLC,CSMA,signal intensity,flooding network
基金项目:
           
作者中文名作者英文名单位
王立城WANG Li-cheng北京智芯微电子科技有限公司
王东山WANG Dongshan北京智芯微电子科技有限公司
白晖峰BAI Hui-feng北京智芯微电子科技有限公司
霍 超Huo Chao北京智芯微电子科技有限公司
摘要点击次数: 1241
中文摘要:
      针对电力线通信信号强度和时延指标无法准确测量,且网络建立过程中缺少路径权值和方向的问题,文章提出了基于AMI测量参数的路径指标间接测量方法。从AMI系统的智能电表和集中器获取线路电压、电流、相位等测量参数,并以台区负荷中心的测量值为参考,利用基尔霍夫定律计算出不同相线测量点的电压损失大小和方向,也可结合线路材质参数计算出线路距离,从而实现了通信网络路径权值和方向的间接测量。为了验证方法的有效性,文章提出了一种采用AMI测量参数的p-持续CSMA洪泛路由算法,实验证明该方法可有效缩短电力线通信网络路径深度和网络时延。
英文摘要:
      In current power line communication (PLC) networks, there still exists great difficulty to measure the signal power and the time delay, and the lack of effective path weights and direction is also a problem in the process of network establishment. Aimed to solve these problems, this article proposes a indirect measuring method based on the AMI measuring parameters.By obtaining the circuit voltage, current, phase parameters from the smart meters and concentrator of AMI system, the value of circuit voltage loss and the voltage directing can be calculated according to Kirchhoff''s law, which belong to the different phase line based on the load center of the low voltage distribution network. Moreover, and the power line distance can also be achieved based on the material parameters, and the indirect measurement of the communication network path value and direction can be realized. In order to verify the effectiveness of the method, this article proposes a p-persistent CSMA flooding network scheme based on AMI parameters. Experimental results show that the application of AMI parameters plays an important role to reduce the depth of the relay and to improve the networking delay.
查看全文  查看/发表评论  下载PDF阅读器
关闭
  • 哈尔滨电工仪表研究所有限公司
  • 中国电工仪器仪表信息网
  • 中国仪器仪表学会
  • 中华人民共和国新闻出版总署
  • 中国科技期刊编辑学会
  • 黑龙江省科学技术协会
  • 编辑之家
  • 中国知网
  • 万方数据库
  • 维普网
  • 北极星电力网
  • 中华中控网
  • 网站首页
  • 期刊介绍
    • 期刊简介
    • 历任主编
    • 期刊荣誉
  • 编委会
    • 社长及主编
    • 主任委员
    • 编委名单
  • 投稿指南
    • 作者须知
    • 投稿步骤
    • 范文(规范细则)
    • 稿件处理流程
    • 著作权转让协议
  • 期刊影响力
  • 开放获取
  • 出版道德政策
    • 出版伦理声明
    • 学术不端认定和处理方法
    • 广告及市场推广
    • 同行评议流程
    • 斟误和撤回
    • 回避制度
    • 文章署名及版权转让
  • 历年目次
  • 联系我们
地址:哈尔滨市松北区创新路2000号    邮编:150028
邮箱:dcyb@vip.163.com    电话:0451-86611021;87186023
© 2012 电测与仪表    哈公网监备2301003445号
黑ICP备11006624号-1
技术支持:北京勤云科技发展有限公司