具有无功补偿功能的单相并网变流器矢量控制方法

杨达亮; 路耕; 吴宁

杨达亮,路耕,吴宁.具有无功补偿功能的单相并网变流器矢量控制方法[J].电测与仪表,2018,55(6):96-100.
YANG Daliang,LU Geng,Wu Ning.Vector Control of Single-phase Grid-connected Converter with Reactive Power Compensation[J].Electrical Measurement & Instrumentation,2018,55(6):96-100.

具有无功补偿功能的单相并网变流器矢量控制方法

Vector Control of Single-phase Grid-connected Converter with Reactive Power Compensation

DOI：

中文关键词: 单相变流器虚构方法矢量控制无功补偿

英文关键词:Single-phase converter fictitious method vector control reactive power compensation

基金项目:广西科技攻关计划项目(桂科攻1348007-4)南宁市科学研究与技术开发计划项目(20155348)

作者中文名	作者英文名	单位
杨达亮	YANG Daliang	广西大学
路耕	LU Geng	广西大学
吴宁	Wu Ning	广西大学

摘要点击次数: 2325

中文摘要:

针对单相并网变流器在电压信号突变情况下传统虚构方法存在延时问题,提出一种新型矢量控制方法。在建立单相变流器数学模型基础上,利用相线电压的相量关系,构造出虚拟的三相电压信号。与目前延时3.33ms的瞬时电压dq分解法和延时5.0ms的αβ检测法相比,实时性明显提高。设计了具有无功补偿功能的单相变流器控制策略。MATLAB/Simulink仿真验证了所提方法的正确性。基于IGBT模块F4-100R12KS4和32位DSP处理器TMS320F2812搭建了实验平台。实验结果表明,系统具有实时无功补偿功能和良好的动静态响应能力。

英文摘要:

A new vector control method for the delay problem in traditional fictitious method of single-phase grid-connected converter in the condition of voltage signal variation is proposed. Based on the mathematical model of single-phase converter, a fictitious three-phase system is created according to phasor relationship between the phase voltage and line voltage. The real-time performance is significantly improved, which is faster than the instantaneous voltage dq conversion method with 3.33ms delay and the αβ detection method with 5.0 ms delay, respectively. Moreover, a single-phase converter control strategy with reactive power compensation is designed. The MATLAB / Simulink simulation verifies the correctness of the proposed method. And a experiment platform is built with the IGBT module F4-100R12KS4 and 32-bit DSP processor TMS320F2812. The experimental results indicate that the system has real-time reactive power compensation function and excellent performance of dynamic and static response.

查看全文查看/发表评论下载PDF阅读器

关闭