• 设为首页
  • 加入收藏
  • 联系邮箱
  • 网站首页
  • 期刊介绍
    • 期刊简介
    • 历任主编
    • 期刊荣誉
  • 编委会
    • 社长及主编
    • 主任委员
    • 编委名单
  • 投稿指南
    • 作者须知
    • 投稿步骤
    • 范文(规范细则)
    • 稿件处理流程
    • 著作权转让协议
  • 期刊影响力
  • 开放获取
  • 出版道德政策
    • 出版伦理声明
    • 学术不端认定和处理方法
    • 广告及市场推广
    • 同行评议流程
    • 斟误和撤回
    • 回避制度
    • 文章署名及版权转让
  • 历年目次
  • 联系我们
  • English
站内检索    
 
李萌,牛胜锁,刘玉芹,赵可为.基于多场耦合模型的海底电缆载流量和温度场计算研究[J].电测与仪表,2018,55(8):12-16.
Li Meng,Niu Shengsuo,Liu Yuqin,Zhao Kewei.Calculation of Temperature Distribution and Ampacity for Submarine Cables Based on Multi-physics Field Coupling Model[J].Electrical Measurement & Instrumentation,2018,55(8):12-16.
基于多场耦合模型的海底电缆载流量和温度场计算研究
Calculation of Temperature Distribution and Ampacity for Submarine Cables Based on Multi-physics Field Coupling Model
DOI:
中文关键词:  海底电缆  载流量  温度场  耦合模型
英文关键词:submarine  cable, current  carrying capacity, temperature  field, coupling  model
基金项目:
           
作者中文名作者英文名单位
李萌Li Meng华北电力大学电力工程系
牛胜锁Niu Shengsuo华北电力大学电力工程系
刘玉芹Liu Yuqin华北电力大学电力工程系
赵可为Zhao Kewei华北电力大学电力工程系
摘要点击次数: 2104
中文摘要:
      海底电缆将电能输送至陆上升压站过程中,各路径段敷设方式下其载流量和温升都对其输送稳定性有着重要影响,电缆载流量和温度场的准确计算对提升电能输送的可靠性与经济性都有着重要意义。文章结合电缆敷设条件,利用COMSOL有限元分析软件建立了基于电磁场、流体场和传热场的多物理场耦合模型,分析了电缆沟内敷设电缆的温度场变化,研究了不同敷设方式对电缆载流量大小的影响。数据表明,电缆敷设的位置和回路数会对电缆载流量产生影响,不规范的敷设位置和密集的回路数都会降低载流量值。因此在工程中应严格按照规范敷设电缆,同时确定适当的回路数以提升运行经济性。
英文摘要:
      When submarine cable transmits electricity to onshore step-up stations,the ampacity and temperature rises of cable have close relationship with reliability in each path section laying mode,the accurate computation of the ampacity of conduit cable and distribution of temperature field has significance for the reliable and economical operation of power grid.This article combined with cable laying condition,With the use of COMSOL multi-physics software,this paper built a multiple physical field coupling model based on electromagnetic field, fluid field and heat transfer field,which simulates ampacity and temperature distribution.The simulation results show that the cable ampacity relies on the concentration degree of cable bundle,and irregular laying positions and overly dense loops can reduce the ampacity.Therefore,it is necessary to follow the procedures requirements to lay cable bundles and determine the appropriate number of loops,which can enhance operational economical efficiency.
查看全文  查看/发表评论  下载PDF阅读器
关闭
  • 哈尔滨电工仪表研究所有限公司
  • 中国电工仪器仪表信息网
  • 中国仪器仪表学会
  • 中华人民共和国新闻出版总署
  • 中国科技期刊编辑学会
  • 黑龙江省科学技术协会
  • 编辑之家
  • 中国知网
  • 万方数据库
  • 维普网
  • 北极星电力网
  • 中华中控网
  • 网站首页
  • 期刊介绍
    • 期刊简介
    • 历任主编
    • 期刊荣誉
  • 编委会
    • 社长及主编
    • 主任委员
    • 编委名单
  • 投稿指南
    • 作者须知
    • 投稿步骤
    • 范文(规范细则)
    • 稿件处理流程
    • 著作权转让协议
  • 期刊影响力
  • 开放获取
  • 出版道德政策
    • 出版伦理声明
    • 学术不端认定和处理方法
    • 广告及市场推广
    • 同行评议流程
    • 斟误和撤回
    • 回避制度
    • 文章署名及版权转让
  • 历年目次
  • 联系我们
地址:哈尔滨市松北区创新路2000号    邮编:150028
邮箱:dcyb@vip.163.com    电话:0451-86611021;87186023
© 2012 电测与仪表    哈公网监备2301003445号
黑ICP备11006624号-1
技术支持:北京勤云科技发展有限公司