• 设为首页
  • 加入收藏
  • 联系邮箱
  • 网站首页
  • 期刊介绍
    • 期刊简介
    • 历任主编
    • 期刊荣誉
  • 编委会
    • 社长及主编
    • 主任委员
    • 编委名单
  • 投稿指南
    • 作者须知
    • 投稿步骤
    • 范文(规范细则)
    • 稿件处理流程
    • 著作权转让协议
  • 期刊影响力
  • 开放获取
  • 出版道德政策
    • 出版伦理声明
    • 学术不端认定和处理方法
    • 广告及市场推广
    • 同行评议流程
    • 斟误和撤回
    • 回避制度
    • 文章署名及版权转让
  • 历年目次
  • 联系我们
  • English
站内检索    
 
刘爱国,钟文磊.基于SPSO算法的分布式电源优化分配[J].电测与仪表,2018,55(10):127-131.
Liu Aiguo,ZhongWenlei.The Optimal Distribution Generation Based on SPSO algorithm[J].Electrical Measurement & Instrumentation,2018,55(10):127-131.
基于SPSO算法的分布式电源优化分配
The Optimal Distribution Generation Based on SPSO algorithm
DOI:
中文关键词:  分布式发电(DG)  选择性粒子群优化(SPSO)  DG优化分配(OPDG)  降低功率损耗
英文关键词:Distributed, Generation, SPSO, OPDG, power  loss reduction
基金项目:
     
作者中文名作者英文名单位
刘爱国Liu Aiguo南昌大学 信息工程学院
钟文磊ZhongWenlei南昌大学 信息工程学院
摘要点击次数: 1782
中文摘要:
      分布式发电(DG)设备能够接入电网中增加电网强度,最大限度地减少实际功率损耗,提高总线电压和配送系统的效率。而DG优化分配(The optimal DG,OPDG)用于提供DG的最佳接入位置,在考虑到DG容量和电压限制的前提下以优化电力配电网的运行。本文采用选择性粒子群优化(Selective Particle Swarm Optimization,SPSO)算法来解决配电网中最优DG布局的问题。目标函数用来解决最佳DG接入位置和配电网中DG机组的大小,以达到有效降低功率损耗,提高电能质量的目的。最大DG穿透水平考虑在总负载的0-50%的范围内。最后,将在IEEE 33和69标准节点总线系统上进行测试,测试结果将与最新的优化技术相对比,从而得出本文提出的方法更加有效率。
英文摘要:
      Distributed generation (DG) devices can be strategically placed in power systems for grid reinforcement,minimizing real power losses, improving bus voltages and efficiency of distribution system. The optimal DG placement (OPDG) method is used to provide the best locations and sizes of DGs to optimize electrical distribution network operation taking into account DG capacity and voltage constraints. In this paper, an efficient SPSO (Selective Particle Swarm Optimization)algorithm is presented to solve the optimal DG placement problem in radial distribution systems. Objective function is formulated for determining the optimal location and sizing of distributed generation (DG) units in the distribution network for active power loss reduction and voltage profile enhancement. Type-I DG is used to solve the problem. Maximum DG penetration level is considered in a range of 0–50% of total load. Proposed solution methodology has been implemented and tested on IEEE 33 and 69 standard bus system. Test results are also compared with latest optimization techniques and found that the proposed algorithm is more effective.
查看全文  查看/发表评论  下载PDF阅读器
关闭
  • 哈尔滨电工仪表研究所有限公司
  • 中国电工仪器仪表信息网
  • 中国仪器仪表学会
  • 中华人民共和国新闻出版总署
  • 中国科技期刊编辑学会
  • 黑龙江省科学技术协会
  • 编辑之家
  • 中国知网
  • 万方数据库
  • 维普网
  • 北极星电力网
  • 中华中控网
  • 网站首页
  • 期刊介绍
    • 期刊简介
    • 历任主编
    • 期刊荣誉
  • 编委会
    • 社长及主编
    • 主任委员
    • 编委名单
  • 投稿指南
    • 作者须知
    • 投稿步骤
    • 范文(规范细则)
    • 稿件处理流程
    • 著作权转让协议
  • 期刊影响力
  • 开放获取
  • 出版道德政策
    • 出版伦理声明
    • 学术不端认定和处理方法
    • 广告及市场推广
    • 同行评议流程
    • 斟误和撤回
    • 回避制度
    • 文章署名及版权转让
  • 历年目次
  • 联系我们
地址:哈尔滨市松北区创新路2000号    邮编:150028
邮箱:dcyb@vip.163.com    电话:0451-86611021;87186023
© 2012 电测与仪表    哈公网监备2301003445号
黑ICP备11006624号-1
技术支持:北京勤云科技发展有限公司