• 设为首页
  • 加入收藏
  • 联系邮箱
  • 网站首页
  • 期刊介绍
    • 期刊简介
    • 历任主编
    • 期刊荣誉
  • 编委会
    • 社长及主编
    • 主任委员
    • 编委名单
  • 投稿指南
    • 作者须知
    • 投稿步骤
    • 范文(规范细则)
    • 稿件处理流程
    • 著作权转让协议
  • 期刊影响力
  • 开放获取
  • 出版道德政策
    • 出版伦理声明
    • 学术不端认定和处理方法
    • 广告及市场推广
    • 同行评议流程
    • 斟误和撤回
    • 回避制度
    • 文章署名及版权转让
  • 历年目次
  • 联系我们
  • English
站内检索    
 
王建元,武金亚,温伟伟,赵鑫,刘鹤.基于DC-DC变换的变电站直流电源设计[J].电测与仪表,2018,55(24):140-144.
WANG Jianyuan,WU Jinya,WEN Weiwei,ZHAO Xin,LIU He.The design of substatoin DC power source based on the DC/DC Converters method[J].Electrical Measurement & Instrumentation,2018,55(24):140-144.
基于DC-DC变换的变电站直流电源设计
The design of substatoin DC power source based on the DC/DC Converters method
DOI:
中文关键词:  后备电源  双重Boost升压变换器  均流控制  不断电互备替换
英文关键词:backup  power supply, Dual  Boost converter, current-sharing  circuit, uninterruptible  alternate power  switch
基金项目:
              
作者中文名作者英文名单位
王建元WANG Jianyuan东北电力大学
武金亚WU Jinya东北电力大学
温伟伟WEN Weiwei东北电力大学
赵鑫ZHAO Xin东北电力大学
刘鹤LIU He国网天津市电力公司
摘要点击次数: 1970
中文摘要:
      在电力系统中后备电源是变电站直流系统的核心。本文针对后备电源的可靠性进行了探讨,提出了双重Boost升压变换器法。为了防止直流电源模块并联运行时产生的环流和电流不均衡现象,本文采用中间电流均流控制法的方案,使升压后的电源模块实现并联互备。使用MATLAB/simulink仿真软件搭建了相应的仿真模型,最后通过仿真分析得出:双重Boost升压法不仅是一种有效的升压方法而且还可以减小电路中功率元件的电流应力。中间电流均流控制法可以实现稳态的均流控制,保证电源模块在出现故障的情况下可以进行不断电互备替换。
英文摘要:
      The back-up power is the core of the substation DC system in power system.Based on the reliability of the back-up power, the method of double Boost the Boost converter is proposed in this paper.To prevent the DC power supply module parallel running when the circulation and current uneven phenomenon, the intermediate current-sharing method is adopted that the booster power supply module in parallel is achieved.The corresponding simulation model is established through the MATLAB/simulink simulation software. From the corresponding simulation we can achieve that the double Boost booster method is both a kind of effective method of booster and an effective method to reduce the power components of current stress in the circuit.The intermediate current-sharing method can realize the steady state flow control and ensure the power supply module can be continuously electricity for replacement in the case of malfunctions.
查看全文  查看/发表评论  下载PDF阅读器
关闭
  • 哈尔滨电工仪表研究所有限公司
  • 中国电工仪器仪表信息网
  • 中国仪器仪表学会
  • 中华人民共和国新闻出版总署
  • 中国科技期刊编辑学会
  • 黑龙江省科学技术协会
  • 编辑之家
  • 中国知网
  • 万方数据库
  • 维普网
  • 北极星电力网
  • 中华中控网
  • 网站首页
  • 期刊介绍
    • 期刊简介
    • 历任主编
    • 期刊荣誉
  • 编委会
    • 社长及主编
    • 主任委员
    • 编委名单
  • 投稿指南
    • 作者须知
    • 投稿步骤
    • 范文(规范细则)
    • 稿件处理流程
    • 著作权转让协议
  • 期刊影响力
  • 开放获取
  • 出版道德政策
    • 出版伦理声明
    • 学术不端认定和处理方法
    • 广告及市场推广
    • 同行评议流程
    • 斟误和撤回
    • 回避制度
    • 文章署名及版权转让
  • 历年目次
  • 联系我们
地址:哈尔滨市松北区创新路2000号    邮编:150028
邮箱:dcyb@vip.163.com    电话:0451-86611021;87186023
© 2012 电测与仪表    哈公网监备2301003445号
黑ICP备11006624号-1
技术支持:北京勤云科技发展有限公司