• 设为首页
  • 加入收藏
  • 联系邮箱
  • 网站首页
  • 期刊介绍
    • 期刊简介
    • 历任主编
    • 期刊荣誉
  • 编委会
    • 社长及主编
    • 主任委员
    • 编委名单
  • 投稿指南
    • 作者须知
    • 投稿步骤
    • 范文(规范细则)
    • 稿件处理流程
    • 著作权转让协议
  • 期刊影响力
  • 开放获取
  • 出版道德政策
    • 出版伦理声明
    • 学术不端认定和处理方法
    • 广告及市场推广
    • 同行评议流程
    • 斟误和撤回
    • 回避制度
    • 文章署名及版权转让
  • 历年目次
  • 联系我们
  • English
站内检索    
 
夏澍,毛俊,施灵,韩浩江.基于负线损分析的计量异常辨识方法[J].电测与仪表,2019,56(16):85-89,122.
Xia Shu,Mao Jun,Shi Ling,Han Haojiang.The Identification Method of Metering Anomaly based on Negative Line Loss Analysis[J].Electrical Measurement & Instrumentation,2019,56(16):85-89,122.
基于负线损分析的计量异常辨识方法
The Identification Method of Metering Anomaly based on Negative Line Loss Analysis
DOI:10.19753/j.issn1001-1390.2019.016.014
中文关键词:  负线损  计量异常  误差分析  辨识方法
英文关键词:negative line loss  abnormal measurement  error analysis  identification method
基金项目:国家电网公司科技项目资助(52091418005N)
           
作者中文名作者英文名单位
夏澍Xia Shu国网上海市电力公司市北供电公司
毛俊Mao Jun国网上海市电力公司市北供电公司
施灵Shi Ling国网上海市电力公司市北供电公司
韩浩江Han Haojiang国网上海市电力公司市北供电公司
摘要点击次数: 1222
中文摘要:
      供电侧计量异常是造成分线线损率统计值为负值的一个重要原因,考虑到计量异常原因较多,仅靠现场排查难度很大。为了克服这一难题,本文提出了一种基于负线损分析的计量异常辨识方法。为了保证分析的全面性和客观性,结合实际运行情况和国家标准,对互感器及其二次回路、电能表等做了详细分析,并提炼了造成负线损超标的主要原因。为了提高现场排查效率,推导了计量异常前后线损率变化关系,并结合数据分析和故障预判提出了计量异常辨识方法,能够在现场排查前分析出可能的异常原因,提升现场核查的准确性。最后,通过实际算例计算,验证了所提方法的有效性。
英文摘要:
      The measurement abnormality on the power supply side is one of the important reasons that the line loss rate is negative. Taking into account the reasons for abnormal measurement is large, it is very difficult to find out the reason by on-site inspection method. In order to overcome this problem, the identification method of metering anomaly based on negative line loss analysis is proposed. In order to ensure the objectivity and comprehensiveness of analysis, the transformer and its secondary circuit, watt-hour meter, etc. are analyzed in detail according to the actual operation and national standards. And the main cause of negative line loss is extracted. In order to improve the efficiency of on-site inspection, the relationship between line loss rate before and after the measurement anomaly is deduced. Based on the data analysis and fault pre-assessment, a metrological identification method is proposed to analyze the possible anomalies and improve the on-site inspection accuracy. Finally, a numerical example is presented to verify the validity of the method.
查看全文  查看/发表评论  下载PDF阅读器
关闭
  • 哈尔滨电工仪表研究所有限公司
  • 中国电工仪器仪表信息网
  • 中国仪器仪表学会
  • 中华人民共和国新闻出版总署
  • 中国科技期刊编辑学会
  • 黑龙江省科学技术协会
  • 编辑之家
  • 中国知网
  • 万方数据库
  • 维普网
  • 北极星电力网
  • 中华中控网
  • 网站首页
  • 期刊介绍
    • 期刊简介
    • 历任主编
    • 期刊荣誉
  • 编委会
    • 社长及主编
    • 主任委员
    • 编委名单
  • 投稿指南
    • 作者须知
    • 投稿步骤
    • 范文(规范细则)
    • 稿件处理流程
    • 著作权转让协议
  • 期刊影响力
  • 开放获取
  • 出版道德政策
    • 出版伦理声明
    • 学术不端认定和处理方法
    • 广告及市场推广
    • 同行评议流程
    • 斟误和撤回
    • 回避制度
    • 文章署名及版权转让
  • 历年目次
  • 联系我们
地址:哈尔滨市松北区创新路2000号    邮编:150028
邮箱:dcyb@vip.163.com    电话:0451-86611021;87186023
© 2012 电测与仪表    哈公网监备2301003445号
黑ICP备11006624号-1
技术支持:北京勤云科技发展有限公司