一种测定三芯电力电缆内各相芯线位置的方法

袁燕岭; 李凯特; 董杰; 高俊福; 李世松; 赵伟

袁燕岭,李凯特,董杰,高俊福,李世松,赵伟.一种测定三芯电力电缆内各相芯线位置的方法[J].电测与仪表,2018,55(24):1-5,10.
Yuan Yanling,Li Kaite,Dong Jie,Gao Junfu,Li Shisong,Zhao Wei.A method for determining the position of each phase core wire in the three-core power cable[J].Electrical Measurement & Instrumentation,2018,55(24):1-5,10.

一种测定三芯电力电缆内各相芯线位置的方法

A method for determining the position of each phase core wire in the three-core power cable

DOI：

中文关键词: 三芯电力电缆质量检验磁场计算电磁场有限元仿真磁传感器

英文关键词:three-core power cable, quality inspection, magnetic field calculation, electromagnetic field simulation, magnetic sensors

基金项目:

作者中文名	作者英文名	单位
袁燕岭	Yuan Yanling	国网唐山供电公司
李凯特	Li Kaite	清华大学电机工程与应用电子技术系电力系统及发电设备控制和仿真国家重点实验室
董杰	Dong Jie	国网唐山供电公司
高俊福	Gao Junfu	国网唐山供电公司
李世松	Li Shisong	清华大学电机工程与应用电子技术系电力系统及发电设备控制和仿真国家重点实验室
赵伟	Zhao Wei	清华大学电机工程与应用电子技术系电力系统及发电设备控制和仿真国家重点实验室

摘要点击次数: 2049

中文摘要:

为解决三芯电力电缆质量检验过程中内部各相芯线位置难以测定的问题,提出了一种测定三芯电力电缆内各相芯线位置的方法。具体地,通过在三芯电力电缆外表面轴向横截面对称地安装2个磁传感器,在给该电缆内某单相芯线施加电流激励后,用磁传感器测量所在位置处磁感应强度的切向分量；根据2个磁传感器的测得量值,利用安培环路定理以及该单相芯线中心位置与磁传感器位置之间的几何关系,求解该单相芯线中心到三芯电力电缆中心的距离,以及该单相芯线中心和三芯电力电缆中心的连线与y轴之间的夹角,即可求解出该单相芯线的位置；通过给三相芯线分别施加电流激励,便可分别测得三相芯线的位置,从而实现对三芯电力电缆内各相芯线位置的测定。电磁场有限元仿真试验和解析模型计算的结果表明,此方法准确性高,对三芯电力电缆生产工艺水平提高和质量检验具有指导价值。

英文摘要:

In order to solve the problem that the position of each phase core wire is difficult to determine during the process of the three-core power cable quality inspection , a method for determining the position of each phase core wire in the three-core power cable is proposed. Specifically, by arranging two magnetic sensors symmetrically on the surface of the three-core power cable, after a single-phase core wire in the three-core power cable is given an current excitation, magnetic sensors are used to measure the tangential component of the magnetic flux density at the position. Based on the measured values of the two magnetic sensors, and using the Ampere loop theorem and the geometric relationship between the position of the single-phase core wire center and the position of the magnetic sensors, the distance from the single-phase core wire center to the three-core power cable center and the angle between the line connecting the single-phase core wire center to the three-core power cable center and the y-axis are solved, ie, the position of the single-phase core wire. By applying current excitation to the three-phase core wires separately, the position of the three-phase core wires can be determined, thereby realizing the determination of the position of each phase core wire in the three-core power cable. The results of electromagnetic finite element simulation and analytical model calculation show that this method has high accuracy and has guiding value for improving the production level and quality inspection of the three-core power cable.

查看全文查看/发表评论下载PDF阅读器

关闭