• 设为首页
  • 加入收藏
  • 联系邮箱
  • 网站首页
  • 期刊介绍
    • 期刊简介
    • 历任主编
    • 期刊荣誉
  • 编委会
    • 社长及主编
    • 主任委员
    • 编委名单
  • 投稿指南
    • 作者须知
    • 投稿步骤
    • 范文(规范细则)
    • 稿件处理流程
    • 著作权转让协议
  • 期刊影响力
  • 开放获取
  • 出版道德政策
    • 出版伦理声明
    • 学术不端认定和处理方法
    • 广告及市场推广
    • 同行评议流程
    • 斟误和撤回
    • 回避制度
    • 文章署名及版权转让
  • 历年目次
  • 联系我们
  • English
站内检索    
 
周保柱,赵峰,高锋阳.基于复合控制的电力电子变压器控制策略研究[J].电测与仪表,2019,56(9):21-26.
zhoubaozhu,zhaofeng,gao feng yang.Research on power electronic transformers based on composite control trategy[J].Electrical Measurement & Instrumentation,2019,56(9):21-26.
基于复合控制的电力电子变压器控制策略研究
Research on power electronic transformers based on composite control trategy
DOI:
中文关键词:  电力电子变压器  前馈控制  智能预测控制  稳定性
英文关键词:Power electronic transformers, Feed-forward control, Model predictive control, stability
基金项目:国家重点研发计划资助
        
作者中文名作者英文名单位
周保柱zhoubaozhu兰州交通大学自动化与电气工程学院
赵峰zhaofeng兰州交通大学自动化与电气工程学院
高锋阳gao feng yang兰州交通大学自动化与电气工程学院
摘要点击次数: 1721
中文摘要:
      在电力电子变压器(PET)中,针对高频变压器连接的输入级与输出级的变换器,现有的调制方法由电压、电流矢量计算和占空比组成,使得控制策略太复杂。在本文中,提出了一种复合控制应用在整个系统中,复合控制器由前馈解耦控制和智能预测控制两部分组成。前馈控制将基于PET系统中的交叉耦合电势进行完全解耦,然后智能预测控制通过的离散模型来预测电路变量,确保交流输出的电流参考值最接近前馈项的估计值。并且在下一个采样周期,选择最合适的开关状态来驱动功率器件。对系统输入和输出之间的不同电压幅值以及负载功率的变化进行仿真实验,仿真结果表明能够改善系统的稳态性能以及抗干扰能力,并得到单位功率因数运行,研究表明了所提出方法的正确性和有效性。
英文摘要:
      In power electronic transformers, for the converters of the input and output stages of the high-frequency transformer connection, the existing modulation method consists of voltage, current vector calculation and duty cycle, making the control strategy too complicated. In this paper, a composite control application is proposed in the whole system. The composite controller consists of feed-forward decoupling control and intelligent predictive control. The feed-forward control is fully decoupled based on the cross-coupling potential in the PET system, and then the discrete model passed by the intelligent predictive control predicts the circuit variables, ensuring that the current reference of the AC output is closest to the estimate of the feed-forward term. And in the next sampling cycle, the most suitable switching state is selected to drive the power device. The simulation experiment is carried out on the different voltage amplitudes and load power changes between the input and output of the system. The simulation results show that the system can improve the steady-state performance and anti-interference ability, and get the unit power factor operation. The research shows that the proposed The correctness and effectiveness of the method.
查看全文  查看/发表评论  下载PDF阅读器
关闭
  • 哈尔滨电工仪表研究所有限公司
  • 中国电工仪器仪表信息网
  • 中国仪器仪表学会
  • 中华人民共和国新闻出版总署
  • 中国科技期刊编辑学会
  • 黑龙江省科学技术协会
  • 编辑之家
  • 中国知网
  • 万方数据库
  • 维普网
  • 北极星电力网
  • 中华中控网
  • 网站首页
  • 期刊介绍
    • 期刊简介
    • 历任主编
    • 期刊荣誉
  • 编委会
    • 社长及主编
    • 主任委员
    • 编委名单
  • 投稿指南
    • 作者须知
    • 投稿步骤
    • 范文(规范细则)
    • 稿件处理流程
    • 著作权转让协议
  • 期刊影响力
  • 开放获取
  • 出版道德政策
    • 出版伦理声明
    • 学术不端认定和处理方法
    • 广告及市场推广
    • 同行评议流程
    • 斟误和撤回
    • 回避制度
    • 文章署名及版权转让
  • 历年目次
  • 联系我们
地址:哈尔滨市松北区创新路2000号    邮编:150028
邮箱:dcyb@vip.163.com    电话:0451-86611021;87186023
© 2012 电测与仪表    哈公网监备2301003445号
黑ICP备11006624号-1
技术支持:北京勤云科技发展有限公司