• 设为首页
  • 加入收藏
  • 联系邮箱
  • 网站首页
  • 期刊介绍
    • 期刊简介
    • 历任主编
    • 期刊荣誉
  • 编委会
    • 社长及主编
    • 主任委员
    • 编委名单
  • 投稿指南
    • 作者须知
    • 投稿步骤
    • 范文(规范细则)
    • 稿件处理流程
    • 著作权转让协议
  • 期刊影响力
  • 开放获取
  • 出版道德政策
    • 出版伦理声明
    • 学术不端认定和处理方法
    • 广告及市场推广
    • 同行评议流程
    • 斟误和撤回
    • 回避制度
    • 文章署名及版权转让
  • 历年目次
  • 联系我们
  • English
站内检索    
 
张德,尚秋峰.220kV单芯交流电缆蛇形敷设下热机械效应有限元分析[J].电测与仪表,2020,57(4):61-65.
Zhang De,Shang Qiufeng.Finite element analysis of thermo-mechanical effect of 220kV single-core AC cable in serpentine laying[J].Electrical Measurement & Instrumentation,2020,57(4):61-65.
220kV单芯交流电缆蛇形敷设下热机械效应有限元分析
Finite element analysis of thermo-mechanical effect of 220kV single-core AC cable in serpentine laying
DOI:10.19753/j.issn1001-1390.2020.04.010
中文关键词:  单芯交流电缆  蛇形敷设  热机械效应  有限元分析
英文关键词:single-core  AC cable, serpentine  laying, thermomechanical  effect, finite  element analysis
基金项目:国家自然科学基金资助项目(51407074,61775057);河北省自然科学基金资助项目(E2015502053)
     
作者中文名作者英文名单位
张德Zhang De华北电力大学电子与通信工程系
尚秋峰Shang Qiufeng华北电力大学电子与通信工程系
摘要点击次数: 1416
中文摘要:
      为了获取蛇形敷设下220kV单芯交流电缆发生热机械效应后的受力情况,利用有限元分析方法进行了建模和仿真。根据现场工况和电缆结构特点建立了相邻两个夹具之间的电缆二维模型,利用热机械耦合法分析了电缆在额定载流量下的温度分布和应力分布,并从数值上分析了不同位置处的应力情况。结果表明,电缆中间自由段部分的应力明显小于两端,铜导体和铝护套在端部的应力超过了它们的屈服强度,容易发生危险。本文研究可为实际敷设和日常巡检提供理论和数据参考。
英文摘要:
      In order to obtain the thermodynamic effect of the 220kV single-core AC cable under serpentine laying, the finite element analysis method was used for modeling and simulation. According to the field conditions and cable structure characteristics, a two-dimensional model of the cable between two adjacent fixtures was established. The temperature distribution and stress distribution of the cable under the rated current capacity were analyzed by thermomechanical coupling method, and the values were analyzed numerically. The results show that the stress in the free part of the cable is significantly less than the two ends, and the stress of the copper conductor and the aluminum sheath at the end exceeds their yield strength, which is prone to danger. This study provides theoretical and data references for practical laying and routine inspections.
查看全文  查看/发表评论  下载PDF阅读器
关闭
  • 哈尔滨电工仪表研究所有限公司
  • 中国电工仪器仪表信息网
  • 中国仪器仪表学会
  • 中华人民共和国新闻出版总署
  • 中国科技期刊编辑学会
  • 黑龙江省科学技术协会
  • 编辑之家
  • 中国知网
  • 万方数据库
  • 维普网
  • 北极星电力网
  • 中华中控网
  • 网站首页
  • 期刊介绍
    • 期刊简介
    • 历任主编
    • 期刊荣誉
  • 编委会
    • 社长及主编
    • 主任委员
    • 编委名单
  • 投稿指南
    • 作者须知
    • 投稿步骤
    • 范文(规范细则)
    • 稿件处理流程
    • 著作权转让协议
  • 期刊影响力
  • 开放获取
  • 出版道德政策
    • 出版伦理声明
    • 学术不端认定和处理方法
    • 广告及市场推广
    • 同行评议流程
    • 斟误和撤回
    • 回避制度
    • 文章署名及版权转让
  • 历年目次
  • 联系我们
地址:哈尔滨市松北区创新路2000号    邮编:150028
邮箱:dcyb@vip.163.com    电话:0451-86611021;87186023
© 2012 电测与仪表    哈公网监备2301003445号
黑ICP备11006624号-1
技术支持:北京勤云科技发展有限公司