• 设为首页
  • 加入收藏
  • 联系邮箱
  • 网站首页
  • 期刊介绍
    • 期刊简介
    • 历任主编
    • 期刊荣誉
  • 编委会
    • 社长及主编
    • 主任委员
    • 编委名单
  • 投稿指南
    • 作者须知
    • 投稿步骤
    • 范文(规范细则)
    • 稿件处理流程
    • 著作权转让协议
  • 期刊影响力
  • 开放获取
  • 出版道德政策
    • 出版伦理声明
    • 学术不端认定和处理方法
    • 广告及市场推广
    • 同行评议流程
    • 斟误和撤回
    • 回避制度
    • 文章署名及版权转让
  • 历年目次
  • 联系我们
  • English
站内检索    
 
于春平,白静芬,周建波,李亦龙,李龙国.基于IEC61850的数字化电能计量二次设备远程校验技术[J].电测与仪表,2019,56(4):135-141.
yuchunping,baijingfen,zhoujianbo,liyilong,lilongguo.Remote on-line calibration technology for digital metering secondary equipment based on IEC61850[J].Electrical Measurement & Instrumentation,2019,56(4):135-141.
基于IEC61850的数字化电能计量二次设备远程校验技术
Remote on-line calibration technology for digital metering secondary equipment based on IEC61850
DOI:
中文关键词:  远程在线校验  数字化电能计量二次设备  IEC 61850  校验逻辑节点  智能变电站
英文关键词:remote on-line calibration, digital metering secondary equipment, IEC 61850, calibration logic node, smart substation
基金项目:国家电网公司总部科技项目(数字化计量关键设备优化升级及检测、监督技术研究)
              
作者中文名作者英文名单位
于春平yuchunping中国电力科学研究院有限公司
白静芬baijingfen中国电力科学研究院有限公司
周建波zhoujianbo南京国电南自电网自动化有限公司
李亦龙liyilong国网浙江省电力有限公司电力科学研究院
李龙国lilongguo南京国电南自电网自动化有限公司
摘要点击次数: 1486
中文摘要:
      本文充分利用数字化计量系统采样数字化、通信网络化以及IEC61850标准可扩展性的特点,基于智能变电站网络架构,提出一种数字化计量二次设备远程在线校验实现方案,该方案基于IEC61850工程电能计量模型进行装置通信建模,采用了计量校验专用逻辑节点MSCN累计测量电能值,通过MMS服务将校验数据传输至站控层,在站内计量设备时钟同步的基础上完成非侵入式校验,具有“就地校验”与“后台校验”2种校验实现模式。在此基础上,设计开发了远程校验系统,最后通过对比试验验证了该方案的准确性与可行性。
英文摘要:
      By making full use of the digitized and networked features of digital metering system and the extensibility of IEC61850 standard, a remote on-line calibration for digital metering secondary equipment based on the network architecture of smart substation has been proposed in this article. In the concrete implementation, the calibration device is modeled based on application model of electric metering in IEC 61850 project, a special logic node MSCN is used to measure the testing electrical energy, and the calibration data is transmitted to the station control layer through the MMS service, as a result, non intrusive calibration is completed on the basis of the clock synchronization of the metering devices in the station, which has the implementation mode of "On-site calibration " and "background calibration". Moreover, a remote calibration system is designed and developed, and the contrast test results show that the scheme is accurate and feasible.
查看全文  查看/发表评论  下载PDF阅读器
关闭
  • 哈尔滨电工仪表研究所有限公司
  • 中国电工仪器仪表信息网
  • 中国仪器仪表学会
  • 中华人民共和国新闻出版总署
  • 中国科技期刊编辑学会
  • 黑龙江省科学技术协会
  • 编辑之家
  • 中国知网
  • 万方数据库
  • 维普网
  • 北极星电力网
  • 中华中控网
  • 网站首页
  • 期刊介绍
    • 期刊简介
    • 历任主编
    • 期刊荣誉
  • 编委会
    • 社长及主编
    • 主任委员
    • 编委名单
  • 投稿指南
    • 作者须知
    • 投稿步骤
    • 范文(规范细则)
    • 稿件处理流程
    • 著作权转让协议
  • 期刊影响力
  • 开放获取
  • 出版道德政策
    • 出版伦理声明
    • 学术不端认定和处理方法
    • 广告及市场推广
    • 同行评议流程
    • 斟误和撤回
    • 回避制度
    • 文章署名及版权转让
  • 历年目次
  • 联系我们
地址:哈尔滨市松北区创新路2000号    邮编:150028
邮箱:dcyb@vip.163.com    电话:0451-86611021;87186023
© 2012 电测与仪表    哈公网监备2301003445号
黑ICP备11006624号-1
技术支持:北京勤云科技发展有限公司