• 设为首页
  • 加入收藏
  • 联系邮箱
  • 网站首页
  • 期刊介绍
    • 期刊简介
    • 历任主编
    • 期刊荣誉
  • 编委会
    • 社长及主编
    • 主任委员
    • 编委名单
  • 投稿指南
    • 作者须知
    • 投稿步骤
    • 范文(规范细则)
    • 稿件处理流程
    • 著作权转让协议
  • 期刊影响力
  • 开放获取
  • 出版道德政策
    • 出版伦理声明
    • 学术不端认定和处理方法
    • 广告及市场推广
    • 同行评议流程
    • 斟误和撤回
    • 回避制度
    • 文章署名及版权转让
  • 历年目次
  • 联系我们
  • English
站内检索    
 
王同文,刘宏君.智能变电站二次回路智能预警及故障诊断技术研究[J].电测与仪表,2020,57(8):59-63.
WANG Tongwen,LIU Hongjun.Research on Intelligent Early Warning and Fault Diagnosis Technology for Secondary Circuit of Intelligent Substation[J].Electrical Measurement & Instrumentation,2020,57(8):59-63.
智能变电站二次回路智能预警及故障诊断技术研究
Research on Intelligent Early Warning and Fault Diagnosis Technology for Secondary Circuit of Intelligent Substation
DOI:10.19753/j.issn1001-1390.2020.08.010
中文关键词:  智能变电站、物理链路模型、过程层、二次回路
英文关键词:Intelligent  Substation, Process  Level, Secondary  Circuit
基金项目:
     
作者中文名作者英文名单位
王同文WANG Tongwen安徽电力调度控制中心
刘宏君LIU Hongjun长园深瑞继保自动化有限公司
摘要点击次数: 1673
中文摘要:
      智能站二次信息传输由以前的电缆改成光纤传输方式,存在信息传输不透明、缺陷查找不方便等问题,基于此,本文提出了智能变电站二次回路智能预警及故障诊断方案,并开发了相应的智能预警及故障诊断系统;根据智能变电站信息传输的特点,针对61850协议中没有物理链路模型的问题,对过程层二次通讯中相应的物理信息节点进行建模,构建二次设备通讯的物理拓扑;并将二次设备虚回路信息流映射到相应的物理拓扑中,使物理拓扑与虚回路信息有机融合,构建完善、虚实结合的二次回路拓扑架构;根据智能变电站内信息流特点建立了智能变电站二次回路专家知识库,通过实时获取装置的运行状态信息综合判断回路实际运行状态,以实现智能变电站二次回路的智能预警及故障诊断。
英文摘要:
      The secondary information transmission method of the intelligent station is changed from the previous cable to the optical fiber transmission mode, which leads to problems such as opaque information transmission and inconvenient defect search. Aiming at these problems, this paper proposes an intelligent early warning and fault diagnosis scheme for the secondary circuit of intelligent substation, and according to the scheme, develops an intelligent early warning and fault diagnosis system. According to the characteristics of intelligent substation information transmission, for the problem that there is no physical link model in the 61850 protocol, the communication units such as switches, devices, optical fibers and cables in the secondary communication physical circuit of the process layer are abstracted and modeled. The physical node grid of the process layer is built in the system. The virtual loop information flow of the communication between devices in the SCD is mapped to the actual physical path, and the secondary loop topology structure combining the physical loop and the virtual loop information is formed. According to the information flow characteristics in the intelligent substation, the intelligent substation secondary loop expert knowledge base is established, and the actual running state of the loop is comprehensively judged by real-time acquisition of the operating state information of the device. Realize intelligent early warning and fault diagnosis of the secondary circuit of intelligent substation, and display it in an intuitive way.
查看全文  查看/发表评论  下载PDF阅读器
关闭
  • 哈尔滨电工仪表研究所有限公司
  • 中国电工仪器仪表信息网
  • 中国仪器仪表学会
  • 中华人民共和国新闻出版总署
  • 中国科技期刊编辑学会
  • 黑龙江省科学技术协会
  • 编辑之家
  • 中国知网
  • 万方数据库
  • 维普网
  • 北极星电力网
  • 中华中控网
  • 网站首页
  • 期刊介绍
    • 期刊简介
    • 历任主编
    • 期刊荣誉
  • 编委会
    • 社长及主编
    • 主任委员
    • 编委名单
  • 投稿指南
    • 作者须知
    • 投稿步骤
    • 范文(规范细则)
    • 稿件处理流程
    • 著作权转让协议
  • 期刊影响力
  • 开放获取
  • 出版道德政策
    • 出版伦理声明
    • 学术不端认定和处理方法
    • 广告及市场推广
    • 同行评议流程
    • 斟误和撤回
    • 回避制度
    • 文章署名及版权转让
  • 历年目次
  • 联系我们
地址:哈尔滨市松北区创新路2000号    邮编:150028
邮箱:dcyb@vip.163.com    电话:0451-86611021;87186023
© 2012 电测与仪表    哈公网监备2301003445号
黑ICP备11006624号-1
技术支持:北京勤云科技发展有限公司