• 设为首页
  • 加入收藏
  • 联系邮箱
  • 网站首页
  • 期刊介绍
    • 期刊简介
    • 历任主编
    • 期刊荣誉
  • 编委会
    • 社长及主编
    • 主任委员
    • 编委名单
  • 投稿指南
    • 作者须知
    • 投稿步骤
    • 范文(规范细则)
    • 稿件处理流程
    • 著作权转让协议
  • 期刊影响力
  • 开放获取
  • 出版道德政策
    • 出版伦理声明
    • 学术不端认定和处理方法
    • 广告及市场推广
    • 同行评议流程
    • 斟误和撤回
    • 回避制度
    • 文章署名及版权转让
  • 历年目次
  • 联系我们
  • English
站内检索    
 
何裕强,王冲,周海强,鞠平.基于主动响应负荷电压调节的预防控制策略[J].电测与仪表,2019,56(8):131-136.
He Yuqiang,王冲,周海强,鞠平.Preventive Control Strategy Based on Active Response Load Voltage Regulation[J].Electrical Measurement & Instrumentation,2019,56(8):131-136.
基于主动响应负荷电压调节的预防控制策略
Preventive Control Strategy Based on Active Response Load Voltage Regulation
DOI:
中文关键词:  预防控制  ZIP模型  CVR  OLTC  暂态电压稳定裕度
英文关键词:preventive control  ZIP model  CVR  OLTC  transient voltage stability margin
基金项目:国家自然科学基金项目( 51837004);
           
作者中文名作者英文名单位
何裕强He Yuqiang河海大学能源与电气学院
王冲王冲
周海强周海强
鞠平鞠平
摘要点击次数: 1314
中文摘要:
      特高压交直流输电和可再生能源发电的增加使得电力系统复杂程度加深,特别是特高压直流输电的容量巨大,一旦发生直流闭锁故障,受端电网功率发生严重缺额,将给电网的安全稳定运行带来巨大冲击,常规处理措施则会切除大量负荷,造成重大经济损失。而采取适当的措施进行预防控制则可以增加电网的稳定裕度,减轻发生故障时电网的压力。本文基于主动响应负荷的分类定义,根据电压响应型负荷的ZIP模型说明其电压特性,然后通过OLTC调压手段,结合负荷主动响应的特性,提出基于主动响应负荷电压调节的预防控制策略,提高静态电压值,从而可以有效的降低事故发生的可能,并在发生事故后,提高暂态电压裕度,从而减少需要切除负荷的量。在河南算例中的仿真结果表明了该策略的有效性。
英文摘要:
      The increase of UHV DC/AC and renewable energy power generation makes the power system more complex. Especially, the capacity of UHVDC transmission is huge. Once the DC lockout accident happens, the power of the receiving end will be seriously deficient, which will bring great impact on the safe and stable operation of the power grid. Conventional treatment will remove a lot of load. Proper preventive control measures can increase the stability margin of power grid and reduce the pressure of power grid when faults occur. Based on the definition of active response load classification, a voltage responsive load ZIP model is established. By means of OLTC voltage regulation and combining with the characteristics of load active response, the preventive control strategy based on active response load voltage regulation is proposed, which can effectively improve the static voltage value that can reduce the probability of accident and improve the transient voltage margin after accidents that can reduce the proportion of load to be removed after the accident. The simulation results in a Henan example show the effectiveness of the strategy.
查看全文  查看/发表评论  下载PDF阅读器
关闭
  • 哈尔滨电工仪表研究所有限公司
  • 中国电工仪器仪表信息网
  • 中国仪器仪表学会
  • 中华人民共和国新闻出版总署
  • 中国科技期刊编辑学会
  • 黑龙江省科学技术协会
  • 编辑之家
  • 中国知网
  • 万方数据库
  • 维普网
  • 北极星电力网
  • 中华中控网
  • 网站首页
  • 期刊介绍
    • 期刊简介
    • 历任主编
    • 期刊荣誉
  • 编委会
    • 社长及主编
    • 主任委员
    • 编委名单
  • 投稿指南
    • 作者须知
    • 投稿步骤
    • 范文(规范细则)
    • 稿件处理流程
    • 著作权转让协议
  • 期刊影响力
  • 开放获取
  • 出版道德政策
    • 出版伦理声明
    • 学术不端认定和处理方法
    • 广告及市场推广
    • 同行评议流程
    • 斟误和撤回
    • 回避制度
    • 文章署名及版权转让
  • 历年目次
  • 联系我们
地址:哈尔滨市松北区创新路2000号    邮编:150028
邮箱:dcyb@vip.163.com    电话:0451-86611021;87186023
© 2012 电测与仪表    哈公网监备2301003445号
黑ICP备11006624号-1
技术支持:北京勤云科技发展有限公司