• 设为首页
  • 加入收藏
  • 联系邮箱
  • 网站首页
  • 期刊介绍
    • 期刊简介
    • 历任主编
    • 期刊荣誉
  • 编委会
    • 社长及主编
    • 主任委员
    • 编委名单
  • 投稿指南
    • 作者须知
    • 投稿步骤
    • 范文(规范细则)
    • 稿件处理流程
    • 著作权转让协议
  • 期刊影响力
  • 开放获取
  • 出版道德政策
    • 出版伦理声明
    • 学术不端认定和处理方法
    • 广告及市场推广
    • 同行评议流程
    • 斟误和撤回
    • 回避制度
    • 文章署名及版权转让
  • 历年目次
  • 联系我们
  • English
站内检索    
 
王渝红,刘进飞,曾琦,秦浩庭,邹朋,陈勇.一种具备直流故障阻断能力的新型子模块研究[J].电测与仪表,2020,57(19):1-7.
Wang Yuhong,Liu Jinfei,Zeng Qi,Qin Haoting,Zou Peng,Chen Yong.Research on a new sub-module with DC fault current blocking capability[J].Electrical Measurement & Instrumentation,2020,57(19):1-7.
一种具备直流故障阻断能力的新型子模块研究
Research on a new sub-module with DC fault current blocking capability
DOI:10.19753/j.issn1001-1390.2020.19.001
中文关键词:  柔性直流输电  子模块  直流故障  拓扑  阻断能力
英文关键词:flexible HVDC, sub-module  DC fault, topology, blocking capability
基金项目:国家重点研发计划资助
                 
作者中文名作者英文名单位
王渝红Wang Yuhong四川大学电气信息学院
刘进飞Liu Jinfei四川大学电气信息学院
曾琦Zeng Qi四川大学电气信息学院
秦浩庭Qin Haoting西南电力设计院有限公司
邹朋Zou Peng西南电力设计院有限公司
陈勇Chen Yong四川大学电气信息学院
摘要点击次数: 1530
中文摘要:
      针对在柔性直流工程中得到广泛应用的半桥子模块无法处理直流侧故障的问题,提出了一种具有直流故障电流自阻断能力的子模块拓扑结构。首先,阐述了新型子模块拓扑的基本结构和运行特性;基于直流故障期间系统等效电路,详细分析了新型子模块的故障电流阻断机理和器件耐压水平;然后对该子模块的混合实施方案进行计算同时对阻断能力和经济特性做出了比较分析;最后在PSCAD/EMTDC仿真平台上搭建了仿真模型,对所提出的子模块阻断能力进行验证。经验证,该型子模块拓扑能够快速有效地清除直流侧故障电流。
英文摘要:
      Considering the problem that Half-Bridge Sub-modules which are widely used in the current flexible HVDC projects cannot deal with DC fault, a sub-module topology with DC fault current self-blocking capability is proposed. Firstly, the basic structure and operation principle of the proposed novel sub-module topology are expounded. Based on the equivalent circuit of the converter station during the time of DC fault, the fault current blocking mechanism and the voltage withstand level of the novel sub-module is analyzed in detail. Then calculate the hybrid implementation of the sub-module and compare the blocking capability and economic characteristics.Finally, a simulation model was built based on PSCAD/EMTDC software environment to verify the blocking ability of the proposed sub-module. From the simulation results, this sub-module topology can block DC fault current quickly and efficiently.
查看全文  查看/发表评论  下载PDF阅读器
关闭
  • 哈尔滨电工仪表研究所有限公司
  • 中国电工仪器仪表信息网
  • 中国仪器仪表学会
  • 中华人民共和国新闻出版总署
  • 中国科技期刊编辑学会
  • 黑龙江省科学技术协会
  • 编辑之家
  • 中国知网
  • 万方数据库
  • 维普网
  • 北极星电力网
  • 中华中控网
  • 网站首页
  • 期刊介绍
    • 期刊简介
    • 历任主编
    • 期刊荣誉
  • 编委会
    • 社长及主编
    • 主任委员
    • 编委名单
  • 投稿指南
    • 作者须知
    • 投稿步骤
    • 范文(规范细则)
    • 稿件处理流程
    • 著作权转让协议
  • 期刊影响力
  • 开放获取
  • 出版道德政策
    • 出版伦理声明
    • 学术不端认定和处理方法
    • 广告及市场推广
    • 同行评议流程
    • 斟误和撤回
    • 回避制度
    • 文章署名及版权转让
  • 历年目次
  • 联系我们
地址:哈尔滨市松北区创新路2000号    邮编:150028
邮箱:dcyb@vip.163.com    电话:0451-86611021;87186023
© 2012 电测与仪表    哈公网监备2301003445号
黑ICP备11006624号-1
技术支持:北京勤云科技发展有限公司