• 设为首页
  • 加入收藏
  • 联系邮箱
  • 网站首页
  • 期刊介绍
    • 期刊简介
    • 历任主编
    • 期刊荣誉
  • 编委会
    • 社长及主编
    • 主任委员
    • 编委名单
  • 投稿指南
    • 作者须知
    • 投稿步骤
    • 范文(规范细则)
    • 稿件处理流程
    • 著作权转让协议
  • 期刊影响力
  • 开放获取
  • 出版道德政策
    • 出版伦理声明
    • 学术不端认定和处理方法
    • 广告及市场推广
    • 同行评议流程
    • 斟误和撤回
    • 回避制度
    • 文章署名及版权转让
  • 历年目次
  • 联系我们
  • English
站内检索    
 
杜仕海,张代润,黄伟,涂丹凤.基于级联H桥多级有源整流器的双模型 预测控制研究[J].电测与仪表,2021,58(3):112-117.
Du Shihai,Zhang Dairun,Huang Wei,Tu Danfeng.Dual Model Predictive Control Research Based on Cascaded H-Bridge Multistage Active Rectifier[J].Electrical Measurement & Instrumentation,2021,58(3):112-117.
基于级联H桥多级有源整流器的双模型 预测控制研究
Dual Model Predictive Control Research Based on Cascaded H-Bridge Multistage Active Rectifier
DOI:10.19753/j.issn1001-1390.2021.03.018
中文关键词:  级联H桥  模型预测控制  luenberger观察器
英文关键词:cascaded H-bridge, model predictive control, luenberger observer
基金项目:
           
作者中文名作者英文名单位
杜仕海Du Shihai四川大学 电气工程学院
张代润Zhang Dairun四川大学 电气工程学院
黄伟Huang Wei四川大学 电气工程学院
涂丹凤Tu Danfeng四川大学 电气工程学院
摘要点击次数: 1953
中文摘要:
      在级联H桥(Cascaded H-Bridge,简称CHB)多级有源整流器中,针对其常使用PI控制器难以准确调节、反应不够快速等问题,提出了一种新颖的CHB多级有源整流器的双模型预测控制(MPC)方法。一次模型是将CHB多级有源整流器的数学模型离散化,然后应用离散化公式对采样数据进行预测,最后通过预测值与参考值的差值来控制目标函数。二次模型利用功率守恒法计算参考源电流,省去了基于PI控制的外环调节。此外,还应用了一个基于luenberger的观察器来估计直流负载电流,从而减少传感器数量。最后,通过MATLAB/Simulink对单相7电平CHB有源整流器的仿真实验,验证了该方法在稳态和瞬态条件下的有效性。
英文摘要:
      In cascaded H-Bridge (CHB) multi-stage active rectifier, a novel double model predictive control (MPC) method is proposed to solve the problems of PI controller which is difficult to accurately adjust and response is not fast enough.The first model is to discretize the mathematical model of CHB multi-stage active rectifier, then predict the sampling data by using the discretization formula, and finally control the objective function by the difference between the predicted value and the reference value. The secondary model uses the power conservation method to calculate the reference source current, eliminating the outer loop regulation based on PI control. In addition, a luenberger-based observer is used to estimate the DC load current, thus reducing the number of sensors. Finally, the simulation experiment of single-phase 7-level CHB active rectifier with MATLAB/Simulink verifies the validity of this method under steady and transient conditions.
查看全文  查看/发表评论  下载PDF阅读器
关闭
  • 哈尔滨电工仪表研究所有限公司
  • 中国电工仪器仪表信息网
  • 中国仪器仪表学会
  • 中华人民共和国新闻出版总署
  • 中国科技期刊编辑学会
  • 黑龙江省科学技术协会
  • 编辑之家
  • 中国知网
  • 万方数据库
  • 维普网
  • 北极星电力网
  • 中华中控网
  • 网站首页
  • 期刊介绍
    • 期刊简介
    • 历任主编
    • 期刊荣誉
  • 编委会
    • 社长及主编
    • 主任委员
    • 编委名单
  • 投稿指南
    • 作者须知
    • 投稿步骤
    • 范文(规范细则)
    • 稿件处理流程
    • 著作权转让协议
  • 期刊影响力
  • 开放获取
  • 出版道德政策
    • 出版伦理声明
    • 学术不端认定和处理方法
    • 广告及市场推广
    • 同行评议流程
    • 斟误和撤回
    • 回避制度
    • 文章署名及版权转让
  • 历年目次
  • 联系我们
地址:哈尔滨市松北区创新路2000号    邮编:150028
邮箱:dcyb@vip.163.com    电话:0451-86611021;87186023
© 2012 电测与仪表    哈公网监备2301003445号
黑ICP备11006624号-1
技术支持:北京勤云科技发展有限公司