• 设为首页
  • 加入收藏
  • 联系邮箱
  • 网站首页
  • 期刊介绍
    • 期刊简介
    • 历任主编
    • 期刊荣誉
  • 编委会
    • 社长及主编
    • 主任委员
    • 编委名单
  • 投稿指南
    • 作者须知
    • 投稿步骤
    • 范文(规范细则)
    • 稿件处理流程
    • 著作权转让协议
  • 期刊影响力
  • 开放获取
  • 出版道德政策
    • 出版伦理声明
    • 学术不端认定和处理方法
    • 广告及市场推广
    • 同行评议流程
    • 斟误和撤回
    • 回避制度
    • 文章署名及版权转让
  • 历年目次
  • 联系我们
  • English
站内检索    
 
龚仁喜,顾佳宇.负荷虚拟同步机惯性与阻尼自适应控制策略[J].电测与仪表,2023,60(3):130-135.
Gong Renxi,Gu Jiayu.Adaptive Control Strategy of Inertia and Damping for Load Virtual Synchronous Machine[J].Electrical Measurement & Instrumentation,2023,60(3):130-135.
负荷虚拟同步机惯性与阻尼自适应控制策略
Adaptive Control Strategy of Inertia and Damping for Load Virtual Synchronous Machine
DOI:10.19753/j.isssn1001-1390.2023.03.019
中文关键词:  负荷虚拟同步机  转动惯量  阻尼系数  自适应控制  动态性能
英文关键词:load virtual synchronous, rotational inertia, damping coefficient,adaptive control, Dynamic performance
基金项目:国家自然科学基金项目( 61561007);广西自然科学基金资助项目(GXNSFAA198168)
     
作者中文名作者英文名单位
龚仁喜Gong Renxi广西大学电气工程学院
顾佳宇Gu Jiayu广西大学电气工程学院
摘要点击次数: 811
中文摘要:
      虚拟同步机(VSM)技术通过模拟传动同步机转子惯性和系统阻尼,对电网提供惯性支撑。然而,阻尼与惯性的引入使得变换器的动态响应速度变慢,当变换器对输出功率进行主动调节时,无法快速、平稳地到达给定值。针对这一问题,本文提出一种惯性与阻尼自适应调节的负荷侧VSM优化控制策略。该控制策略通过在功率调节不同阶段,自主调节VSM的惯性J和阻尼D,实现对输出功率的优化控制。为了验证该控制策略的有效性,建立了VSM的MATLAB/Simulink模型,对其进行了仿真实验。仿真结果表明,与传统控制方法相比,基于该控制策略的同步机有功功率的调节速度更快,调节过程中的波动和超调更小,具备更好的动态调节性能。
英文摘要:
      Virtual synchronous machine (VSM) technology provides inertia support for power grid by simulating rotor inertia and system damping of drive synchronous machine. However, the dynamic response speed of converter is reduced by damping and inertia. It can not reach the given value quickly and smoothly when the converter need to regulate the output power. In order to solve this problem, an optimal control strategy of load side VSM with adaptive adjust of inertia and damping is proposed in this paper. At different stages of power regulation, the inertia J and damping D of VSM will be regulated autonomously to realize the optimal control of output power. In order to verify the effectiveness of the strategy, the MATLAB/Simulink model of VSM is established and the simulation experiment is carried out. Compared with the traditional control method, the active power regulation speed of the synchronous machine is faster, the fluctuation and overshoot in the regulation process are smaller and the dynamic regulation performance is better.
查看全文  查看/发表评论  下载PDF阅读器
关闭
  • 哈尔滨电工仪表研究所有限公司
  • 中国电工仪器仪表信息网
  • 中国仪器仪表学会
  • 中华人民共和国新闻出版总署
  • 中国科技期刊编辑学会
  • 黑龙江省科学技术协会
  • 编辑之家
  • 中国知网
  • 万方数据库
  • 维普网
  • 北极星电力网
  • 中华中控网
  • 网站首页
  • 期刊介绍
    • 期刊简介
    • 历任主编
    • 期刊荣誉
  • 编委会
    • 社长及主编
    • 主任委员
    • 编委名单
  • 投稿指南
    • 作者须知
    • 投稿步骤
    • 范文(规范细则)
    • 稿件处理流程
    • 著作权转让协议
  • 期刊影响力
  • 开放获取
  • 出版道德政策
    • 出版伦理声明
    • 学术不端认定和处理方法
    • 广告及市场推广
    • 同行评议流程
    • 斟误和撤回
    • 回避制度
    • 文章署名及版权转让
  • 历年目次
  • 联系我们
地址:哈尔滨市松北区创新路2000号    邮编:150028
邮箱:dcyb@vip.163.com    电话:0451-86611021;87186023
© 2012 电测与仪表    哈公网监备2301003445号
黑ICP备11006624号-1
技术支持:北京勤云科技发展有限公司