• 设为首页
  • 加入收藏
  • 联系邮箱
  • 网站首页
  • 期刊介绍
    • 期刊简介
    • 历任主编
    • 期刊荣誉
  • 编委会
    • 社长及主编
    • 主任委员
    • 编委名单
  • 投稿指南
    • 作者须知
    • 投稿步骤
    • 范文(规范细则)
    • 稿件处理流程
    • 著作权转让协议
  • 期刊影响力
  • 开放获取
  • 出版道德政策
    • 出版伦理声明
    • 学术不端认定和处理方法
    • 广告及市场推广
    • 同行评议流程
    • 斟误和撤回
    • 回避制度
    • 文章署名及版权转让
  • 历年目次
  • 联系我们
  • English
站内检索    
 
孟祥有,梁帅,孙谦浩,孟经伟.基于占空比主动调节的钳位开关电容型DC/DC解耦控制策略[J].电测与仪表,2024,61(5):212-217.
Meng Xiangyou,LIANG Shuai,Sun Qianhao,Meng Jingwei.Decoupled control strategy based on duty-ratio active regulation for clamping switched capacitors-based DC/DC application[J].Electrical Measurement & Instrumentation,2024,61(5):212-217.
基于占空比主动调节的钳位开关电容型DC/DC解耦控制策略
Decoupled control strategy based on duty-ratio active regulation for clamping switched capacitors-based DC/DC application
DOI:10.19753/j.issn1001-1390.2024.05.029
中文关键词:  钳位开关电容型DC/DC  解耦控制  电流应力  软开关
英文关键词:clamping switch capacitor-based DC/DC, decoupled control, current stress, soft-switching
基金项目:国家自然科学基金项目(51877116)
           
作者中文名作者英文名单位
孟祥有Meng Xiangyou国网通辽供电公司
梁帅LIANG Shuai国网通辽供电公司
孙谦浩Sun Qianhao清华大学电机系
孟经伟Meng Jingwei清华大学电机系
摘要点击次数: 448
中文摘要:
      钳位开关电容型DC/DC(Clamping Switched Capacitors-based DC/DC,CSC)是构建具有直流故障自清除能力直流变压器的有效模块。由于传统控制策略下的CSC中直流电压与电容电压存在着耦合效应,直流电压的变化将直接引起电容电压与交流环节电压幅值的变化,使得CSC在两端直流电压不匹配时可能发生软开关丢失、电流应力增大、功率损耗增加等运行性能下降的现象。鉴于此,为改善CSC在直流电压不匹配时的开关及效率性能,提出了一种基于可变占空比的CSC电容电压解耦控制策略。该策略可以在CSC的整个运行范围内保证交流电压幅值的自动匹配,对于改善CSC的整体运行性能具有明显效果。基于试验样机,验证了所提控制策略的正确性与有效性。
英文摘要:
      The clamping switch capacitor-based DC/DC (CSC) is an effective module to construct the DC transformer with the capability of DC faults clearing. However, the voltage amplitude of capacitor and AC-link will be influenced directly by the change of DC voltages in the traditional control of CSC because of the coupling effect of DC voltage and capacitor voltage, thus the loss of soft-switching, the increase of current stress and power loss may occur when the DC voltages are unmatched. In view of this issue, a capacitor voltage decoupled control strategy based on the variable duty-ratio is presented for CSC to improve the switching and efficiency performance when the DC voltage is unmatched. The proposed control strategy can guarantee the amplitude of AC voltages is matched in the full-operating-range of CSC automatically, so the efficiency of CSC can be enhanced obviously. The correctness and effectiveness of the proposed control strategy are validated by the prototype.
查看全文  查看/发表评论  下载PDF阅读器
关闭
  • 哈尔滨电工仪表研究所有限公司
  • 中国电工仪器仪表信息网
  • 中国仪器仪表学会
  • 中华人民共和国新闻出版总署
  • 中国科技期刊编辑学会
  • 黑龙江省科学技术协会
  • 编辑之家
  • 中国知网
  • 万方数据库
  • 维普网
  • 北极星电力网
  • 中华中控网
  • 网站首页
  • 期刊介绍
    • 期刊简介
    • 历任主编
    • 期刊荣誉
  • 编委会
    • 社长及主编
    • 主任委员
    • 编委名单
  • 投稿指南
    • 作者须知
    • 投稿步骤
    • 范文(规范细则)
    • 稿件处理流程
    • 著作权转让协议
  • 期刊影响力
  • 开放获取
  • 出版道德政策
    • 出版伦理声明
    • 学术不端认定和处理方法
    • 广告及市场推广
    • 同行评议流程
    • 斟误和撤回
    • 回避制度
    • 文章署名及版权转让
  • 历年目次
  • 联系我们
地址:哈尔滨市松北区创新路2000号    邮编:150028
邮箱:dcyb@vip.163.com    电话:0451-86611021;87186023
© 2012 电测与仪表    哈公网监备2301003445号
黑ICP备11006624号-1
技术支持:北京勤云科技发展有限公司