• 设为首页
  • 加入收藏
  • 联系邮箱
  • 网站首页
  • 期刊介绍
    • 期刊简介
    • 社长及主编
    • 期刊荣誉
  • 编委会
    • 主任委员
    • 编委名单
    • 青年编委名单
  • 投稿指南
    • 作者须知
    • 投稿步骤
    • 范文(规范细则)
    • 稿件处理流程
    • 著作权转让协议
  • 期刊影响力
  • 开放获取
  • 出版道德政策
    • 出版伦理声明
    • 学术不端认定和处理方法
    • 广告及市场推广
    • 同行评议流程
    • 斟误和撤回
    • 回避制度
    • 文章署名及版权转让
  • 历年目次
  • 联系我们
  • English
站内检索    
 
艾渊,李家浩,孙立元,刘兴龙,张益鸣,杨昊.基于模型-数据混合驱动的配电网线损异常诊断方法[J].电测与仪表,2026,63(1):115-122.
AI Yuan,LI Jiahao,SUN Liyuan,LIU Xinglong,ZHANG Yiming,YANG Hao.A method for diagnosing abnormal line loss in distribution network based on model-data hybrid driven algorithm[J].Electrical Measurement & Instrumentation,2026,63(1):115-122.
基于模型-数据混合驱动的配电网线损异常诊断方法
A method for diagnosing abnormal line loss in distribution network based on model-data hybrid driven algorithm
DOI:10.19753/j.issn1001-1390.2026.01.012
中文关键词:  线损  异常诊断  数据驱动  聚类算法  X-bar控制图
英文关键词:line loss, abnormal diagnosis, data driven, clustering algorithm, X-bar control diagram
基金项目:南网信息化项目(0500002022030304JL00003)
                 
作者中文名作者英文名单位
艾渊AI Yuan云南电网有限责任公司, 昆明 650000
李家浩LI Jiahao云南电网有限责任公司, 昆明 650000
孙立元SUN Liyuan云南电网有限责任公司, 昆明 650000
刘兴龙LIU Xinglong云南电网有限责任公司, 昆明 650000
张益鸣ZHANG Yiming云南电网有限责任公司, 昆明 650000
杨昊YANG Hao云南电网有限责任公司, 昆明 650000
摘要点击次数: 50
中文摘要:
      线损包括技术线损和非技术线损,是电网经济运行的重要技术指标。针对当前线损异常检测中标记样本较少,难以确定异常位置的问题,文中提出了基于数据混合驱动的异常诊断方法,包含三个阶段:异常馈线检测、异常时段检测和异常位置检测。在异常馈线检测阶段,先进行异常馈线检测特征提取,当标记样本不足时,采用聚类算法进行检测,积累足够的标记样本后,采用分类算法进行检测,提高准确率;在异常时段检测阶段,引入X-bar控制图理论,将超出控制上下限的时段判定为异常时段;在异常位置检测阶段,构建了三个风险指标,并基于此提出了变压器风险等级判定准则,定位异常位置。最后,基于实际运行数据进行仿真分析,验证了文中方法的正确性和有效性。
英文摘要:
      Line loss includes technical and non-technical line losses, which is an important technical indicator for the economic operation of power grid. In response to the problem of limited labeled samples in current line loss anomaly detection, which makes it difficult to determine the location of anomalies, this paper proposes a data hybrid driven line loss anomaly diagnosis method in distribution network, which includes three stages: abnormal feeder detection, abnormal period detection, and abnormal position detection. In the stage of abnormal feeder detection, the first step is to extract abnormal feeder detection features. When there are insufficient labeled samples, clustering algorithms are used for detection. After accumulating sufficient labeled samples, classification algorithms are used for detection to improve accuracy;In the detection stage of abnormal time periods, the X-bar control chart theory is introduced to determine the time periods that exceed the upper and lower limits of control as abnormal time periods;In the abnormal position detection stage, three risk indicators are constructed, and on this basis, a transformer risk level judgment criterion was proposed to locate the abnormal position. Finally, simulation analysis is conducted based on actual operating data to verify the correctness and effectiveness of the proposed method.
查看全文  查看/发表评论  下载PDF阅读器
关闭
  • 哈尔滨电工仪表研究所有限公司
  • 中国电工仪器仪表信息网
  • 中国仪器仪表学会
  • 中华人民共和国新闻出版总署
  • 中国科技期刊编辑学会
  • 黑龙江省科学技术协会
  • 编辑之家
  • 中国知网
  • 万方数据库
  • 维普网
  • 北极星电力网
  • 中华中控网
  • 网站首页
  • 期刊介绍
    • 期刊简介
    • 社长及主编
    • 期刊荣誉
  • 编委会
    • 主任委员
    • 编委名单
    • 青年编委名单
  • 投稿指南
    • 作者须知
    • 投稿步骤
    • 范文(规范细则)
    • 稿件处理流程
    • 著作权转让协议
  • 期刊影响力
  • 开放获取
  • 出版道德政策
    • 出版伦理声明
    • 学术不端认定和处理方法
    • 广告及市场推广
    • 同行评议流程
    • 斟误和撤回
    • 回避制度
    • 文章署名及版权转让
  • 历年目次
  • 联系我们
地址:哈尔滨市松北区创新路2000号    邮编:150028
邮箱:dcyb@vip.163.com    电话:0451-86611021;87186023
© 2012 电测与仪表    哈公网监备2301003445号
黑ICP备11006624号-1
技术支持:北京勤云科技发展有限公司